Cane, Murrini, Incalmo Oh MY! by Pringle Teetor

Pringle Teeter glassMaking cane starts with picking up a piece of color bar that has been preheated to almost 1,000 degrees on the end of a steel rod, then heated and shaped. This is the center color of the cane. While one person is doing this, another is preparing a different chunk of color in the same way to cover the first color in an overlay. Then, by heating and shaping the glass on the marver, the second color is distributed to cover the first color, then one or two gathers of clear glass are added to encase the color. After the second gather, the glass is heated and shaped to set it up to be pulled into cane. When pulling cane, one person prepares a post on another steel rod to attach to the mass of colored glass. When the glass is at the right temperature, the post is connected to the end of the glass and the two people walk away from each other, stretching the glass like taffy. When the glass has been stretched to the diameter needed, the cane is held tight for a few seconds to ensure it’s straight as it hardens. It is then set down on the wood boards to cool. Once cooled, the cane is cut into lengths to be incorporated into work.

Pringle Teetor glassMurrine (common pluralization murrini) is an Italian term for colored patterns or images made in a glass cane (long rods of glass) that are revealed when cut in cross-sections. Murrine can be made into infinite designs—some styles are more familiar, such as millafiore. To make the murrini I make a color core in the same way as described above, then roll up cane around the core. The cane is heated on a plate in the glory hole (reheating furnace for glass blowing) by an assistant, then pulled the same way as cane. Once cooled, the bars are sliced up on a diamond saw. In pieces where murrini is used for patterns, much of your time goes into planning and preparing to make them before you even start the actual piece.

Incalmo is a technique invented in Murano in the 16th century, to create vessels with distinct bands of color. Two or more cylindrically-shaped blown objects of different colors are made then attached while hot on the blow pipe, and blown further to create a vessel.

Pringle Working with GlassThe joining of the two vessels takes great precision and careful measuring to ensure that the pieces will fit correctly and stay joined. Each piece of glass that is to be made into one is blown separately and must be the same width at the base or top where it is to be fused to another piece of glass. This second piece must be placed directly at the edge of the first piece and fit perfectly so there is no overlap of the edges.

Here is a picture of me working on a vessel when glass artist Ed Schmid was visiting from Washington State. The center part is a murrini roll up, which I previously attached to the vessel on the pipe, and now Ed is attaching the bottom vessel.

Blown Glass by Pringle TeetorMurrini roll ups and incalmo pieces are something I really would like to do more in the future. However, these are not pieces I can do alone. Towards the end of this past season I was fortunate to be able to hire an assistant, Matt Decker, who blows glass for the Corning Museum of Glass, to work with me on some very special new pieces. These pieces take careful planning, extra time,  and money to produce and my hope is to do more of this type of work in the future.

Note that you can always find samples of Pringle’s work — illustrating various techniques such as these described here — at the  Hillsborough Gallery of Arts. You can also find her work at Cedar Creek Gallery where her studio is located.

Also, Pringle’s work was recently included in the book 100 Southern Artists.  A beautiful coffee table book which can be purchased at the Hillsborough Gallery . This book provides you with a fresh look at the magical and insightful compositions of artists living in Alabama, Florida, Georgia, North Carolina, South Carolina, Virginia, and West Virginia.

And, here is the link to Pringle’s website.

Posted by: Trudy Thomson at 5:44 pm 0 Comments

OCAG Artists:

Posted in: Glass

The Properties of Light by Mirinda Kossoff

In Place by Linda Carmel   This article, written by Mirinda Kossoff, describes the work of three OCAG individuals that will be featured in an upcoming show at the Gallery, which opens July 23rd. In this show, which is titled Refractions, Linda Carmel, Pam Isner, and Marcy Lansman each pursue their relationship to the properties of light […]

Posted by: Trudy Thomson at 11:00 am 0 Comments

The Magic and Mystery of Fusing Glass by Trudy Thomson

Glass is amorphous, meaning that “its molecules are not arranged in a regular, specific pattern — like those of a crystalline material — but are random in their configuration.” (Bulleyes TechNotes4, 2007) And, unless you have worked with glass in a kiln, as flame work, or blown, you might not know how finicky glass can be. As […]

Posted by: Trudy Thomson at 4:09 pm 0 Comments

OCAG Artists:

Posted in: Glass